-40%

Left LH Rear Brake Master Cylinder 50cc 125cc 150cc 200cc Scooter ATV Motorcycle

$ 8.15

Availability: 100 in stock
  • Application: 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV
  • Country/Region of Manufacture: China
  • Condition: New
  • Type: Rear Brake, Left Side Master Cylinder 50-250cc ATV
  • Placement on Vehicle: Left
  • Brand: PartsGalore
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Manufacturer Part Number: F44
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back

    Description

    ITEM DESCRIPTION:
    Left hand Rear Brake Master Cylinder with brake light switch, fits 7/8" handlebars and 10mm brake line bolt, used on various 50cc to 250cc Scooters, ATVs & Motorcycles.
    Brake Bleeding Info:
    These systems are nearly impossible to bleed using the bleeder screw because the air keep floating up the line.
    I have always had luck with the following method...
    1) Close the bleeder screw, fill the mast cyl about 1/2 to 3/4 with fluid, gently and slowly pull the lever in and release slowly.
    You will see bubbles floating up through the fluid.
    NOTE:  If you pull or release the lever too fast, you may foam up the fluid in the cyl valve making
    the job harder. Also, if you pull the lever too fast with the top off.. the fluid will squirt out... making a mess.
    2
    )
    Add
    fluid if it get much lower than 1/2 way.
    3) Once you get most of the air out you will start to get some brakes.
    They
    may still
    feel
    a little spongy but as long as you have
    working
    brakes your
    go
    od to go. Any remaining tiny bubbles will work their way out as you use the brakes.
    I have never had a system where this method failed to work
    ,
    but you must be patient.
    One last note:
    Brake fluid kills plastic and paint... so wash any spills with soap and water when you're done.
    This item brought to you by:
    Visit my
    eBay Store
    to see all my items
    !
    RETURNS:
    Customer satisfaction is my top priority, as a result, I don’t have many returns. Returns cost both of us time and money so please contact me with any questions you may have before bidding. I will spend as much time and effort as needed to make sure you get the part you need.
    CUSTOMER SATISFACTION:
    I hope to earn positive feedback and 5 stars from all of my customers. If I don't measure up, please allow me to fix what I did wrong. I'm not perfect, but I will always try to be.
    WHY BUY FROM PARTSGALORE?
    1) I only sell the best quality parts at very reasonable prices. Everything I sell comes with my personal quality guarantee. 2) I treat my customers with kindness and respect always. 3) I only sell what I have on hand and ready for immediate shipment.